KSU PVC WELDING MACHINE W80 HOT JET 2

For the welding, make the angle between the rod and the base metal at around 70~90 and repeat the heating of 1 2 3 4 in 0 5~1 second cycle. The distance between 1 2 will be 10~15mm, and 3 4 will be 10-30mm. The hem of the nozzle will be 10-20mm from the rod and the base metal, and the angle of the nozzle will be 40~45 against the rod and the base metal.
Retreat the flaring machine while doing the welding. The welded part may burn if the temperature is too high, the air volume is not sufficient enough or the progress of the work is slow or poor. In this case, lower the scale of the voltage adjustment volume and adjust temperature. Operation at high temperature or speedy work becomes possible as the worker is accustomed to the work. This process is the standard for PVC, but thermo plastic resin and other resins can be welded in a similar way by adjusting at high temperature and controlling the speed.

Code : #KSU-/-2

Quantity

Enquiry: